Wednesday, July 31, 2019

Lamp at Noon & the Pursuit of Happyness Essay

The film â€Å"The Pursuit of Hapyness† is in many ways very relatable to the short story â€Å"The Lamp at Noon†. The two are closely related as they before share similar overall themes. â€Å"The Pursuit of Hapyness† greatly demonstrates the themes of commitment to personal goals and the effects of adversity on the human spirit. This film follows the life of a man and his family as they struggle through everyday conflicts. These conflicts vary from trying to pay rent to getting food on the table for dinner. Chris Gardener, the protagonist in the film is eventually forced on the streets with his son Christopher while the mother, Linda, leaves to New York. Chris is faced with great conflict as he is pursuing a job as a stockbroker but must complete a non-paying internship first while trying to take care of Christopher. However, Chris is committed to his personal goals and pushes through the excessive amount of adversity he is faced with. The film is connected to the â€Å"The Lamp at Noon† for various reasons. â€Å"The Lamp at Noon† briefly follows the life of Paul, Ellen and their very young baby as they are faced with severe adversity. Their hardships come from a storm that has destroyed there crops that leads to a poor relationship between the two. The theme of the effects of adversity on the human spirit is shown in â€Å"The Lamp at Noon† through several ways. Firstly, it leads to Paul and Ellen to become miserable and unable to come to mutual decisions. Additionally, Ellen is not able to handle the adversity and attempts to run away from the farm, which leads to the death of her baby. Given these points, one can see how both the film â€Å"The Pursuit of Happyness† and the short story â€Å"The Lamp at Noon† are related through the common theme of the effects of adversity on the human spirit.

Tuesday, July 30, 2019

The US Financial Crisis: A personal Revelation

After the Second World War, no one ever though that the father of democracy and the most developed nation in the world would ever be affected by a crisis arising from financial issues.   The growth of US and its position as a world power was due to the central role it played in the world war and the developments it made thereafter.Feared by its enemies and respected by its allies, the US was and still is the envy of all nations.   Though still the most developed nation and a financial power, the 2008 crisis which was a result of a combination of factors including a fall of sub prime, failure of financial establishments, high oil prices, unbearable rates of inflation and the failure of major industries.The order presented is quite similar to the actual events though there were considerable overlaps.   The US economy is badly affected, many jobs have been lost and to deal with the effects o the crisis the US will need to develop robust economic strategies.Any normal society can b e divided into two major categories: the poor and the rich.   This is a categorisation whose basis is resource ability and influence is a true depiction of the reality on the ground.   Happiness is assumed to be directly related to financial ability and all that most people seek in their lives is resource empowerment.   A look at the US shows that the cause of failure of its system arose from a single cause which multiplied.   If one should fall into the temptation that the route to happiness is amassing wealth at all cost, then they are just as gullible to failure for such an approach was the reason behind failure of sub prime mortgages.Even the rich in the society have their own problem which may even be greater than those of the poor; a third world nation is less likely to be faced by a crisis of such magnitude.When one is developing his riches, he should ensure that he develops other support systems for in reality the quest for money has no clear correlation to happiness .   Happiness is a state of mind and one cannot justify that by being rich he will live his life a happy person for as at now both Americans and Iraqis are suffering.The US case has been a personal revelation on the nature of life and what does entail.   Life is complex and success does not guarantee one will live a trouble free life.   The resilience that the Americans have shown in the face of adversity should be adopted by all people journeying through life.   The knowledge that all are susceptible to challenges is important in generating hope which is central in to the entire recovery process.The US approach to the crisis is a jewel to behold.   The US acknowledged it had a crisis and took relevant measures that did not necessarily involve the help of other nation rather the mechanisms implemented internally developed systems to deal with the crisis.Call it the personal will to deal with a problem or having the ability to; either one should never ignore their problems but should acknowledge that a problem exist and take relevant measure to deal with the problem. Screaming for help is not always the best approach to dealing with personal problems for we all have infinite personal ability that we must develop in times of plenty and emplo

Monday, July 29, 2019

Tegan case study Example | Topics and Well Written Essays - 1250 words

Tegan - Case Study Example and Baven (1994) and Domberger (1998), this concept has been formally defined as â€Å"an activity where the supplier provides for the delivery of goods and/or services that would previously have been offered in-house by the buyer organization in a predetermined agreement† (Tho, 2005, â€Å"Agreeing the Definition of Outsourcing†). In keeping with this brief introduction, the current research will aim at evaluating the decision of Tegan, Inc. (Tegan) to outsource its accounts payable (A/P) project and recommending one or more feasible options from among those that had already been identified by the organization. As has been mentioned in the introduction, the decision that had been taken by Tegan while outsourcing it’s crucial A/P project will be evaluated under this heading. Considerable efforts will be made to identify the reason behind outsourcing, the major outsourcing challenge, and the tradeoffs in requirement analysis (performed by Hrad Technika – a Czechoslovakian IT company). Subsequently, the choice of development methodology will be discussed and problems pertaining to scope and requirements will also be analyzed. Finally, light will also be shed on the IT-management failures of the organization. It has been reported that despite sluggish sales, Tegan had managed to grown constantly all through its life. On being approached by the Chinese toy maker Fan Li in May 2007, Tegan could not apprehend that the inclusion of this accessory line would lead to a situation where the increase in orders will not match with that in sales growth. However, the contract was perceived to be a mismatch because of wide differences that existed between the two companies in terms of pricing – while Tegan’s products came at an average price of  £50, Fan Li often priced its accessories below  £5. It has been observed that the profit margin being in the range of 1 percent the major concern at Tegan was the error-free management of the A/P process. As the A/P process at

Sunday, July 28, 2019

Conflict between the Governments Macroeconomic Objectives Essay

Conflict between the Governments Macroeconomic Objectives - Essay Example Increase in Inflation rate which is defined as the regular rise in prices. To have stability in prices, the inflation rate should be zero. Having zero inflation rate is hard to achieve and also undesirable for an economy. A basic objective of the government to keep the inflation rate low and keep it in that level for a prolonged period of time (Munasinghe, 1996). In this regard, internal balance is aimed which is full employment with zero rates of inflation. Technically, it is measured as the annual rate of change of the Retail Price Index (RPI).Full employmentFull employment is achieved when all the human recourse which are capable of work and willing to work in an economy are fully employed in different sectors. Though this is really not achievable that’s what frictional and structural unemployment is considered to be present at the same time.High and sustainable economic growth: A high economic growth is achieved by allowing an increase in the living standards.In this regar d, the no structural and environmental difficulties should be present to hinder the growth in the economy. Economic growth tends to be measured in terms of the rate of change of real GDP (Gross Domestic Product).Equilibrium in the balance of paymentsThe aim is to bring balance in the payment with the use of any artificial constraint: the goal is to achieve balance in exports and imports in long run. The deficit of payments should be balanced by the surplus in other payments to achieve the complete balance.

Saturday, July 27, 2019

How people react to robots Essay Example | Topics and Well Written Essays - 1000 words

How people react to robots - Essay Example This research will begin with the statement that response to robot interaction is a recently emerged area of research that is working to understand how the humans perceive and react towards robots in the social interaction scenario. Recent works have shown that people respond differently to the robot, but also show a similar flow of character towards the devices. Several future challenges have also been considered in these studies, for instance, physical embodiment and correct reading the robot intentions, to come up with sociable robots. Finally, for robots to live up to their mission, the focus will have to drift from competitive generation of robots to production of robots that are functional co-action and co-ordination. Whatever is happening to technology is affecting the day to day behavior of humans in all lines of business. Researchers are invading the human society and this is a reality. From the entertainment to performing household chores, to looking after the elderly, and to educating the children, people will soon be welcoming and accepting their existence. The changes are inevitable; avoiding this will be fighting a losing battle. Research on robot revolution shows that, though this will take time, people will need to learn ways of responding to these changes and try to see the positive impact this will have in the society. That is what this survey is about; the response of the humans to robots in the society.... According to [2] the sociable robots are robots that are capable of fully engaging in the social situation and have their own motivation for being involved in these types of interaction. These robots will be capable of interacting with humans on a social level and be comfortable and familiar with them, thereby, allowing the interactions to seem easy and natural [3]. Ref: [1] researcher referred this to simple trust from the humans. Although there are other types of robots for instance; socially evocative robots and social interface: This research will entirely dwell on sociable robots. III. Critical analysis Human robot interaction is increasingly becoming a topic of popular culture and academic interest, and most try to answer the question regarding the role of robots, the ethical issues in relation with its legal issues, and how the robots interact with humans [7]. Though not everyone writer of the popular culture writers have affected the field of robotics research. A. Shampoo Rob ot Project With the recent technological evolution, robots have been known as objects that can walk, talk or point. However, Panasonic has decided to add another action of robots to the ever increasing list by developing a robot that can shampoo one’s hair. The shampoo-Bot currently is on trial in japan to see how effective it works. Many have argued that it borrows from the car wash machine, but, all the same it is a descent innovation one must say. The hair care robot sounds a fascinating thing to hairdressers. The robot composition includes a reclining chair with a wash basin at the back both mechanized to achieve its task. According to [8] released on YouTube,

Physiotherapy Assignment Example | Topics and Well Written Essays - 2500 words

Physiotherapy - Assignment Example All practitioners use different sources to inform clinical practice in order to increase their effectiveness in the delivery of care. Section 8.5 of the QAS in the Chartered Society of Physiotherapy (CSP) requires physiotherapists to identify the best treatment options based on sources such as clinical guidelines and empirical evidence (Chartered Society of Physiotherapy 2012, sec. 8). Other sources include utilizing the highly experienced physiotherapists and the clinical performance instruments and models, which improves delivery of care. These sources are reliable and when used in clinical practice, they enhance professional empowerment, increase the ability to solve problems and increase the quality of care delivered to patients. On another hand, the sources are prone to inadequate reporting, homogeneity and generalization of the research findings. The CSP has also provided standards that govern the reflective practice in physiotherapy. In section 3.1, practitioners are required to reflect and engage in continuing professional development (CPD) process in order to be competent in health practice. One can utilize reflective models to analyse one’s learning experience and achieve the quality assurance standards stipulated in the CSP. The most commonly used models include the Atkins and Murphy model of reflection and John’s model of reflection of 1994. Over the past decades,emphasis has been put in evaluating the quality of services delivered by physiotherapist whilst in practice. As a result, the practitioners have increasingly utilized empirical research as a source of information, which support decision making.In order to improve decision-making and problem-solving, practitioners have been encouraged to transfer the research findings into the clinical practice.As a result, the evidence based practice has been born. Research shows that evidence based practice requires three components, that is, the physiotherapists,

Friday, July 26, 2019

The Potential Change Implementation Program Research Paper

The Potential Change Implementation Program - Research Paper Example Since the inception of academic activities of XYZ University, the examination department of the university has been maintaining a system of examination in which students like most of the other university students, follow the paper-pen-pencil strategy while attempting the examination as per the university policy. As the university has shown tremendous growth in the number of students enrolled and admitted in the university, for examination department within a short span of time, it has become very challenging to complete the process of examination which mainly includes the printing of question papers, collection of question papers and answer scripts, dispatching them to respective faculty members and then recollecting them to compile and announce the results. This whole process has many loopholes that examination department has to face, most of them are a loss of answer scripts while dispatching and recollection from the faculty members, unnecessary delays from the faculty members, lo ads of burden on examination personnel when result deadline approaches etc. All the above-mentioned issues cause harms to the quality of assessment which actually becomes the reflection of the performance of the students. As a result, some deserving students become unfortunate as their results are not the true pictures of their hard work and some careless students love their fortune to end up with flying colours courtesy the poor quality performance of the examination department. The examination committee along with the dean and registrar of the university are put forward the following reasons to bring in the change in the examination process.

Thursday, July 25, 2019

Service Reflection Essay Example | Topics and Well Written Essays - 500 words

Service Reflection - Essay Example I once worked at an after school child program where it was my responsibility to help children with their homework. Being a person without very good English skills, I was worried that the children would not understand what was being said, so I was only able to help with mathematics. Mathematics is a universal language so I thought this would make up for my lack of English-speaking skills. It was my responsibility in this role to help children achieve their greatest successes, even when the children were difficult and hard to manage. This is part of Jesus’ teaching on servant leadership: To do unto others as one would have done unto yourself. I tried to remember this when working with small children, as they need a person who is willing to provide patience and understanding even when they are naughty. By not immediately responding to my own attitudes and concerns about my own weaknesses in English teaching skills, I realized that the children had many positive qualities that would help me reach them better. If I had not drawn on these teachings provided by the Holy Bible, I would not have been able to drop my own fears about insecurity. This is why I am thankful for having servant leadership qualities that were given to me by faith and conviction. When working with the children, I realized that they had many needs. Some of these needs were emotional and others were to have help in order to give them better academic successes. Only a good leader that understands the servant leadership beliefs of religion would be able to reject their own needs in order to provide a better learning experience for the small children. When working with one specific child named Patrick, who was very difficult to teach because of his behavior and attitudes, I realized that the many lessons inspired by Jesus Christ would help me to reach him better. I suddenly realized during the experience that this child needed someone who would be tolerant

Wednesday, July 24, 2019

Independent study Essay Example | Topics and Well Written Essays - 5000 words

Independent study - Essay Example Students of business have new worlds to dominate and explore. And these students who will become the masters of business tomorrow should be equipped with knowledge, skill and expertise that have to be continuous and maintained all throughout their existence in the real and the virtual world. There is one very important knowledge and skill that they should have – soft skills. (Carbonara, 2005, p. 197) According to Banerjee (2008), professional people should polish and continually improve their â€Å"communication skill, office etiquette and decorum to acquire a place of unrivalled supremacy†. Communication skill is a part of professional life. If a professional wants to improve, he/she has to improve continually along with the soft skills required of the job as a professional or as a business person. MBA graduates use soft skills to enhance and further their careers. Global research conducted by the Association of MBAs stated that post-graduates use soft skills more than ever to climb up the ladder of success. In one survey, named the Career 2008 Survey, 2,000 MBA students from business schools worldwide took part to answer questions by researchers. The survey doubled the response to the previous survey which took place in 2006. The study examined the impact on career development and found that there were five predetermined skills that were beneficial to their careers, and these were conceptual competence, which involves using theory to deal with business problems; business planning skills; interpersonal skills; working within a group, and leadership. (McGahern, 2009) These skills were not learned in a formal classroom setting but through a special training for soft skills. The training requires a special programme and involves interaction among peers. There will be more on this discussion in the proceeding sections of this paper. Aims and Objectives The objectives of this essay are: a.) to define and discuss the soft skills business students and p rofessionals must have in order to climb up the ladder of success; b.) to know what professional communication skills are needed for business students; and, c.) to recommend the proper etiquette, ethics and attitude for an effective communication in the professional and business world. Methodology The strategy used in this essay is to focus on an analysis of the vast literature on communication skills, touching on areas of soft skills being practiced by business people, and about effective communication implemented by business leaders and managers. The strategy will be to conduct an analysis of the literature, focusing on the definition and the soft skills needed business students and professionals. There have been various researches conducted in the past, but not enough analysis have been done to show whether these researches helped, one or another, in formulating adequate communication skills for business students and members of organizations involved in various communicative tool s. Fraenkel and Wallen (2006, p. 16) stated that â€Å"critical researchers should raise a number of philosophical, linguistic, ethical, and political questions ... about all fields of inquiry, ranging from the physical sciences to literature.† Critical research on the literature regarding soft skills is an interesting topic for discussion. The

Tuesday, July 23, 2019

Analysis on Language, culture and communitcation Article - 1

Analysis on Language, culture and communitcation - Article Example 88 interviews, a review of 10,000 documents and 12,000 photos and video, was completed only on Tuesday morning, just hours before the hastily called news conference. The investigators recommended that the UN Security Council require Israel to launch its own credible investigation into the conflict within three months. If that is not done, the investigators called on the council to refer the matter for action by the International Criminal Court prosecutor within six months. However, Israel does not accept the courts authority. "The mandate of the mission and the resolution establishing it prejudged the outcome of any investigation, gave legitimacy to the Hamas terrorist organisation and disregarded the deliberate Hamas strategy of using Palestinian civilians as cover for launching terrorist attacks," Israels Foreign Ministry said. Goldstone, who is Jewish and has strong ties to Israel, told reporters at UN headquarters that "to accuse me of being anti-Israel is ridiculous," anticipating such criticism. He said it was in the interest of both Israelis and Palestinians to establish the truth of what happened in the conflict. In a joint statement, nine Israeli human rights groups said the findings join a "long series of reports" indicating that Israeli and Hamas violated the laws of war. It called on the Israeli government to conduct an "independent and impartial investigation." "Notwithstanding its reservations, Israel will read the report carefully," the Foreign Ministry said on Tuesday of the UN report, noting that the military has examined more than 100 allegations regarding the conduct of its forces during the Gaza operation, resulting in 23 criminal investigations. It found seven incidents in which civilians were shot while leaving their homes trying to run for safety, waving white flags and sometimes even following Israeli instructions, as well as the targeting of a mosque at prayer time, killing 15 people, were also war crimes. "Where there is no intended

Monday, July 22, 2019

The National Literacy Strategy Essay Example for Free

The National Literacy Strategy Essay The following essay will consider some of the components of the literacy hour and discuss the strategies teachers use to utilise these methods within the classroom. Literacy is at the heart of the drive to raise standards in schools (DfES, 2001, pg2) The above quote is taken from the National Literacy Strategy framework for teaching which, since 1998 has highlighted the importance of teaching English to all schoolchildren. The framework was introduced to couple the National Curriculum document and builds on theories and ideas from previous reports (such as the Kingman report: 1988 and the Cox report: 1989) and documentation which since 1975 have highlighted the importance of having certain attainment targets that children should be achieving. These targets are the acquisition of good speaking, listening, reading, writing and spelling skills, and the Literacy strategy influences teachers in planning and delivering at least an hour long literacy lesson each day, focusing on one or more of these targets. According to the National Literacy document children use a range of strategies, or searchlights, when reading to help them make sense of text. These searchlights fall into four categories. These are; phonic knowledge, grammatical knowledge, knowledge of context/word recognition and graphic knowledge (DfES: 2001. p 4) When teaching reading teachers will break their lesson down into shared (whole class) and guided (independent with support from teacher) sessions. When delivering shared and guided reading sessions teachers can model to children how to draw upon all four of the searchlights to aid them in their reading. Shared reading normally focuses on word and text level work and so teachers will plan for a whole class read in which specific features such as spelling patterns, alliteration, punctuation or the intention of the piece that is being read will be highlighted for to the class. (Ibid). Practitioners are also able to model how clues contained within the piece (such as pictures, exclamation or speech marks) can be used to predict how the story is to be read. However, during guided or independent reading children have to use what knowledge they have of the English language to read on their own. It is for this reason that practitioners will plan to teach the use of phonics to children from an early age. As young children find it hard to discriminate the sounds of letters automatically the teaching of phonics or letter sounds is used by teachers to help children to recognise the correct spelling of a word (DfES 2001). The most effective practitioners will teach children how to identify the phonemes in spoken language and then build an understanding of how each phoneme is correctly spelt. When children have acquired a sound knowledge of these phonemes, practitioners will educate them in two new skills known as segmentation and blending.

Military Discipline Essay Example for Free

Military Discipline Essay Bring out uniformity in cooperating for the attainment of a common goal. This uniformity is obtained when an individual understands how to fit into an organization as a whole. To understand one another through the sharing of common goals. To ensure effectively of a group not only for specified purposes but also for emergencies. To install responses automatically without panic in an emergency. D. Principles of Effective Discipline Men fell wore secure if they knew that reward and punishment come to them because of behavior and not because of an officers word, mood or preference. An officer must be loyal to his men and worthy, takes an interest in them and makes sure they are granted rights and privileges. An officer commands publicly and reproves and reprimand privately. He gains the confidence of his men and is worthy of it. An officer/leader must set an example. E. Military Courtesy it is the accepted form of politeness in the military service. The foremost of this special form of courtesy is the salute. It is the expression or manifestation of consideration for others. F. Whom to Salute Commissioned officers of the AFP, National Flag, Colors, and standard not cased. Officers of foreign Armed Forces whose government is recognized by the republic of the Philippines. All civilians who are entitled by the custom to the salute. G. Proper Manner of Saluting Except when walking one should always be at attention when saluting. The right hand is raised smartly until the tip of the forefinger touches the lower part of the headgear or forehead and slightly to the right eye. Thumb and finger are extended and joined. The palm is turned slightly in front of the body. The forearm is inclined at 45 degrees angle and the hand and wrist are in straight line. The first position of the hand salute or the nearest point of approach is more or less six paces. The first position of the salute should be held until the person saluted to have passed or the salute is returned. The hand salute under the naval custom is accompanied by a word of greeting such as good morning, Sir/Maam depending on the time of day. Naval custom permits saluting with left hand when a salute cannot be rendered by the right hand. H. Major Fault in Saluting Bowing the head as the salute is given. Dropping the hand salute before it has been returned. Holding the hand awkwardly high or letting it sag too low. Saluting while on the double time. Avoiding the gaze of the person saluted to. Saluting with a pipe, cigar, or cigarette in the mouth or in hand. I. Honors to the Colors and Anthem Whenever the National Anthem is played and you are not on formation and not in a vehicle, come to attention and at the first note, face the flag and render the prescribed salute. If no flag is nearer, face the music and salute. Vehicles in motion are brought to halt. Troop formations, riding in vehicles do not disembark. If outdoors and uncovered, attend at attention and face the flag. If indoor, officers and enlisted men will stand at attention. The passing of being passed by an uncased color, which is being paraded, presented or in its own formal display, a salute at six paces before and until it has passed you. In uncovered, stand at attention when passing by uncased color. The marks of respect above are also rendered to the national anthem of any friendly country when played upon an official occasion. Discipline 1. Training to act in accordance with rules; drill. 2. Activity, exercise, or a regimen that develops or improves a skill; training 3. Punishment inflicted by way of correction and training. 4. The rigor or training effect of experience, adversity 5. Behavior in accord with rules of conduct; behavior and order maintained by training and control

Sunday, July 21, 2019

Factors Affecting The Weight a Column Can Withstand

Factors Affecting The Weight a Column Can Withstand Matthew Keeley   Physics EEI This extended experimental investigation explores the weight a paper column can withstand before it buckles and how changing the diameter, length and thickness of a column affects its critical load. Multiple columns with varying diameters, lengths and thicknesses were constructed and each one had masses added to it until it buckled. The hypotheses If the diameter of a paper column is increased, then the weight the paper column can withstand before buckling will also increase exponentially and If the length of a paper column is decreased, then the weight the paper column can withstand before buckling will increase exponentially were not supported while the hypothesis If the thickness of a paper column is increased, then the weight the paper column can withstand will also increase proportionally was supported. Columns are used in architecture and structural engineering, in the walls of houses and buildings, to transmit weight through compression from the structure above the column to the structural elements beneath (Merriam-webster.com, 2017). Objects are only referred to as columns when the force is applied axially; they are referred to as beams otherwise (Waddell, 1925). Column buckling is likely the only area of structural mechanics where failure is not due to the strength of the material, but the stiffness of the material and the shape of the column instead (McGinty, 2017). Buckling occurs in a column when its critical load is reached and this value can be determined by the Euler column formula, which is as follows: Where is the critical load (), is the modulus of elasticity (), is the area moment of inertia (, is the length of the column () and is the column effective length factor (Engineeringtoolbox.com, 2017). Engineers commonly use mm instead of regular SI unit, examples of the formula being used use mm (Critical Buckling Load (Example 1) Mechanics of Materials, 2013). This formula is used mainly to calculate the buckling load of steel and wooden columns so its application in the buckling of paper columns is questionable although it is the only method available. There are some unknown values in the equation without researching them using other sources, the value, the value and the value. The value, the modulus of elasticity (also known as youngs modulus, the elastic modulus or the tensile modulus) is a constant that is a measure of the stiffness of a material (Askeland et al., 1996). It is the slope of the stress-strain curve in the elastic region given by: A relationship known as Hookes Law, Hookes law states that the strain in a solid is proportional to the applied stress within the elastic limit of that solid (Encyclopedia Britannica, 2017). For example, if an object with a high modulus of elasticity had the same force applied to it as an object with a low modulus of elasticity there would be a greater change in dimension in the object with the smaller modulus of elasticity. The modulus of elasticity is represented in pascals () but the value is usually very large so it is found in gigapascals instead (. When calculating theoretical data to keep the units the same the modulus of elasticity was represented in as. The modulus of elasticity for paper is 2 (www-materials.eng.cam.ac.uk, 2017). The value represents area moment of inertia (also known as second moment of area). It is a geometrical property of an area representing how its points are distributed regarding an axis within the object (Beer and Johnston, 1990). It is calculated using multiple integral over the columns cross-section, but its easier to utilise an already existing formula for the second moment of area of the column in question. Since the column that will be used in the experiment is rolled up paper it will have a hollow cylindrical cross-section which will appear as: The formula for second moment of area for a hollow cylindrical cross-section is as follows: Where is the radius of the outside circle and is the radius of the inside circle (Efunda.com, 2017). The second moment of area also determines the way a column is most likely to buckle (towards the plane or the plane). Usually there would be multiple formulae for the second moment of area, one for buckling towards the plane and one for buckling toward the plane, but since the cross section in question is hollow cylindrical and the axis (where the weight will be applied) is in the centre of the cross-section the formulae are identical. If the cross section was a filled rectangular area, for instance, and appeared as: Then the formulae for second moment of area are as follows: One would have to solve for both and and find out on which plane the column is most likely to buckle along and use that value as the second moment of area in the Euler column formula (What is second moment of area?, 2015). The units for second moment of area are metres to the fourth power (, but since the units need to be kept the same and the radius will be represented in millimetres when doing theoretical data, it will be in millimetres to the fourth power () instead. The last unknown value is which is the column effective length factor (Wai-Fah and Duan, 1999). It is determined by the boundary conditions. The value changes depending on if the column is fixed on both ends, hinged on both ends, fixed on one end free on another, etc. The columns used in the experiment are free on both ends so the theoretical value is 1, but the actual value derived from various other experiments is 1.2, so that value will be used in theoretical data (Efunda.com, 2017). For this experiment to be a success many variables must be remain the same that were quite difficult to control. To attempt to control these variables some precautions were taken. For example, to keep the distribution of weight the same a transparent board was used so the weight could be placed in the centre of the column and distributed evenly. Also, the paper columns need to be made carefully so that there are no weaknesses in the column because weaknesses in the column arent factored into Eulers column formula. The dimensions for paper are 29.7mm x 21mm x 0.1mm (for 80gsm A4 paper). Theoretical Data Calculating second moment of area (). Substituting into Eulers column formula and solving to find critical load. Calculating the mass the column could withstand using . This value is very large and a paper column of the dimension used in the calculations would certainly crumble under this amount of force in real life applications, but this may be due to all the other variables that are difficult to control at play, such as weaknesses in the column geometrically and weight distribution rather than the formula being incorrect. Theoretical data results tables and graphs Changing Columns diameter Columns diameter (mm) Mass before column buckles (kg) 95 1063.45 90 904.06 85 761.45 80 634.69 75 522.84 70 424.96 65 340.14 60 267.42 55 205.89 50 154.60 Changing Column Length Column thickness (mm) Mass before column buckles (kg) 0.1 934.57 0.2 1862.98 0.3 2785.27 0.4 3701.46 0.5 4611.57 0.6 5515.63 0.7 6413.67 0.8 7305.72 0.9 8191.81 1.0 9071.95 Changing Columns Thickness Columns Length (mm) Mass before column buckles (kg) 210 934.56 200 1030.36 190 1141.68 180 1272.05 170 1426.11 160 1609.94 150 1831.76 140 2102.78 130 2438.73 120 2862.12 The following hypotheses that were prompted due to the background research are as follows: Changing Columns Diameter If the diameter of a paper column is increased, then the weight the paper column can withstand before buckling will also increase exponentially. Changing Columns Length If the length of a paper column is decreased, then the weight the paper column can withstand before buckling will increase exponentially. Changing Columns Thickness If the thickness of a paper column is increased, then the weight the paper column can withstand will also increase proportionally. Changing Columns Diameter Various paper columns were constructed carefully (as to reduce weak points in the column) with different diameters, starting at 9.5cm diameters reducing the diameter by 0.5cm for every column until 10 columns had been made, so that there was enough variation in the data to develop more accurate results. The column with the smallest diameter had a diameter of 5cm. The experiment was then set up like the diagram on the previous (without the weights). The board on the bottom of the column was set up to protect the bench from damage from the falling weights and a small transparent board was placed on top of the column so that the weights could be accurately placed in the centre of the column to keep the distribution of weight even.   50g masses were then added to the column until it buckled and the mass that is buckled at was graphed for later analysis. This process was completed for all the columns made beforehand and the experiment was repeated until 3 trials had been completed so the data discovered was more accurate. Changing Columns Length Paper columns with various lengths were constructed carefully, starting at a length of 21cm and reducing by 1cm until 10 columns had been made, so there was enough variation in the data to provide more accurate results. The column with the smallest length had a length of 12cm. The experiment was then set up like the diagram (without the weights). The board on the bottom of the column was set up to protect the bench from damage from the falling weights and a small transparent board was placed on top of the column so that the weights could be accurately placed in the centre of the column to keep the distribution of weight even.   50g masses were then added to the column until it buckled and the mass that is buckled at was graphed for later analysis. This process was completed for all the columns made beforehand and the experiment was repeated until 3 trials had been completed so the data discovered was more accurate. Changing Columns Thickness Paper columns with varying thicknesses were constructed by taping pieces of paper together (1 piece of paper has a thickness of 0.1mm, 2 taped together 0.2mm, etc.) until 10 columns had been made, so there was enough variation in the data to provide more accurate results. The experiment was then set up like the diagram (without the weights). The board on the bottom of the column was set up to protect the bench from damage from the falling weights and a small transparent board was placed on top of the column so that the weights could be accurately placed in the centre of the column to keep the distribution of weight even.   50g masses were then added to the column until it buckled and the mass that is buckled at was graphed for later analysis. This process was completed for all the columns made beforehand and the experiment was repeated until 3 trials had been completed so the data was more accurate. Variables Dependent Variable The independent variable is the mass the column can withstand before it buckles, as this is what the experiment is testing and what changes when the independent variables are manipulated. Independent Variables The independent variables in this experiment are the ones that get changed, the diameter, the length and the thickness. Changing these will affect the dependent variable. Controlled Variables The controlled variables are everything that was kept the same during the experiment, although these may have changed regardless of efforts to keep them the same during the experiment. They include: the temperature and pressure, brand of paper, consistency of columns, distribution of weight, wind conditions, material of column, weights that were used, elevation and the material experiment was performed on. Safety When the column buckles, the weights will fall off the column and potentially an injury could occur. To deal with this the falling weights must be avoided and people entering the area of the experiment should be careful walking through. A mechanism to catch the board so the weights dont fall could also be constructed. Scissors could potentially be used to cut someone. To deal with this the scissors were treated with caution and used appropriately. Wearing goggles will also protect the eyes. Changing Columns Diameter Diameter (mm) Mass before column buckled (kg) Trial 1 Trial 2 Trial 3 Average 95 2.0 1.4 1.7 1.7 90 1.7 1.6 2.0 1.8 85 1.7 1.1 1.5 1.4 80 1.2 1.8 2.0 1.7 75 1.3 2.4 1.5 1.7 70 1.5 1.4 2.0 1.6 65 1.5 1.5 1.6 1.5 60 1.2 1.6 1.7 1.5 55 0.9 1.3 1.0 1.1 50 0.8 1.0 0.6 0.8 Changing Columns Length Length (mm) Mass before column buckled (kg) Trial 1 Trial 2 Trial 3 Average 210 2.0 1.4 1.7 1.7 200 1.2 1.5 1.6 1.4 190 1.1 1.0 1.2 1.1 180 1.5 0.9 1.0 1.1 170 1.0 2.0 1.7 1.6 160 1.6 2.0 2.1 1.9 150 1.6 2.0 1.9 1.8 140 1.0 1.8 2.3 1.7 130 1.4 1.5 1.7 1.5 120 1.7 2.1 1.8 1.9 Changing Columns Thickness Thickness (mm) Mass before column buckled (kg) Trial 1 Trial 2 Trial 3 Average 0.1 2.0 1.4 1.7 1.7 0.2 2.1 1.8 2.3 2.1 0.3 2.8 3.0 1.7 2.5 0.4 3.3 4.2 2.6 3.4 0.5 4.2 3.4 4.8 4.1 0.6 5.1 5.4 4.5 5.0 0.7 5.9 6.3 5.7 6.0 0.8 7.6 6.6 7.8 7.3 0.9 8.0 8.5 9.0 8.5 1.0 10.0 9.0 8.9 9.3 The results for changing column diameter seem to have a pattern to them, the weight that the column can support increases with diameter, but while the mass the column could withstand changed with diameter the increments in which the value changed reduced every time the diameter increased (logarithmic relationship). The results for changing the length of the column provided results that were expected, the weight the column could withstand decreased as the length of the column was decreased though a proper relationship between the points was underivable. The results for the thickness of the column were as expected, the mass the column could withstand increased proportionally with the thickness of column. As evident by the graphs above the theoretical data differs greatly to the empirical data. The theoretical data shows an exponential relationship between the mass withstood and the diameter of the paper column while the empirical data shows a more logarithmic relationship (if the experiment was continued further the mass withstood would have continued to increase with diameter). The mass the column can withstand is also much larger in the theoretical data than the empirical data. This is because the theoretical calculations dont factor in the weaknesses in the column geometrically and its extremely unlikely that the distribution of mass was perfect, even if the mass was placed a millimetre off the axis the mass the column could withstand would decrease drastically. Therefore, it would be difficult to get empirical results the same as the theoretical data due to many variables that are nearly impossible to control when dealing with paper columns. As shown in the graphs above the mass the column can withstand does decrease as length increases in the empirical data but is hard to decipher a relationship when looking at the empirical data due to anomalies. These anomalies would yet again be caused by variables that are too difficult to control within the experiment and for the same reasons the mass the column can withstand in the theoretical data is much greater than the mass the column could withstand in reality. The relationship between these two sets of data is identical (both increasing proportionally) although the mass the column could withstand theoretically is much greater than the mass it could withstand empirically. A possible reason that the relationship was evident in the empirical data for changing the thickness of the column and not for changing the diameter and length could be that changing the thickness affects the mass the column can withstand much more than changing either the length of the column or its diameter (reducing anomalies), this is evident when comparing the theoretical data for the three variables. Due to the varying relationships found in the empirical data and the complexity of the formula used it is difficult to relate Eulers column formula to existing mathematical models when looking at changing the columns diameter or length because the relationship is either exponential () or logarithmic (). Eulers column formula can be related to the linear function that is found when changing the columns thickness though. because a column with 0 length, diameter or thickness

Saturday, July 20, 2019

Furniture in Greenbelt :: Interior Design Furniture Essays

Furniture in Greenbelt A Sign of the Tough Times A view of the front of a typical housing project in the planned community of Greenbelt. The Greenbelt community was built beginning in 1937 as low income housing for people who were making between $1,200 and $2,000 dollars a year. The houses were built at minimum cost and this means that the rooms are small. Thus special furniture was designed in order to fit into these small houses and to provide sturdy, economical, and good looking furnishings for the new residents. "Instead of following the conventional pattern of designing the house from the outside in, Resettlement architects have built primarily from the inside out." (House Beautiful 1937) Miss Elizabeth Hofflin, the technical consultant for the Resettlement Administration, was quoted as saying "We made the furniture to fit the small rooms of these low-rent units. We found that ordinary living room furniture would overflow from wall space and block doorways and windows." (Daily News, April 20, 1937) "The furniture you see was built for these rooms and for these rooms alone."(House Beautiful, April 1937) The furniture that was designed for Greenbelt needed to be very affordable. "The idea was to provide essential items of furniture which will fit into a minimum amount of space and at the same time make them attractive, low-priced and extremely durable."(Daily News, April 20, 1937) Miss Hofflin explains, "we concentrated upon strong construction and simple design, which can be made with the least expense with factory machines. We used the three cheapest woods--maple, oak and gum; we have no acquaintances at all with mahogany and walnut." The government was able to furnish the Greenbelt community for very little money with careful planning and very frugal designers. And the furniture was affordable! In 1939 a resident of Greenbelt was able to furnish his entire household for $239.97. The full amount was paid off by the resident over a four year period at $5 a month. There was also a 3% interest charge payable in monthly installments of $2.50. This was an excellent deal for these New Deal residents. The federal government assisted the original Greenbelters, first, by building them an inexpensive home and, second, by enabling them to furnish their houses economically as well. In this way, the government provided many families with an opportunity to set up housekeeping on their own that they otherwise would not have had. Kimberly Myers expresses similar views on the government helping out the people in her exhibition on the construction of Greenbelt.

Friday, July 19, 2019

Finding the Truth in Gretchen Moran Laskas’s The Midwife’s Tale Essay

Finding the Truth in Gretchen Moran Laskas’s The Midwife’s Tale The prologue to Gretchen Moran Laskas’s novel, The Midwife’s Tale, begins with her narrator protagonist, Elizabeth, telling readers, â€Å"Mama always said that most of being a good midwife was in knowing the family history. Not just the birthing story of any given woman--although that was a good thing to keep in mind--but the whole history.† Assuming the â€Å"whole history† is a thing possible to know in the first place, a dubious aim in itself, Moran Laskas’s novel ends up reading as a sort of family history: at times exultant, heartbreaking, occasionally comic, and more than once bone-chillingly grim. Beginning at the turn of the century and ending roughly forty years later as the Depression enters its last stages, Laskas’s novel follows the passions, failures, and triumphs of sometimes-midwife Elizabeth and the small group of mountain folk and family she shares her life with along the banks of Kettle Creek. Feeding her readers a painfully, if beautifully, detailed fare of the arduous lives endured by turn-of-the-century Appalachians, Moran Laskas serves up a novel that journeys between sorrow and triumph without ever indulging in sentimentality as her characters try to survive poverty, mountain life, a world war, an influenza epidemic, and the Depression. With image-rich descriptions of Appalachia’s natural landscape, Moran Laskas shares the stirring, at times comic, rural language of Elizabeth and the novel’s other midwives, Elizabeth’s mother and maternal grandmother, to construct a believable, if sometimes haunting world that periodically resembles a feminized utopia as much as it does an historical account of life in the mountains. Although Moran Laskas’s p... ...being told may very well be something other than what appears to be real, consequently implying a possible difference between reality and truth. While Moran Laskas is probably not hinting at a postmodern spin on the unreality of knowingness or the ultimate absence of a universal â€Å"truth,† her novel does, nevertheless, suggest a kind of nebulous and unstable relationship between the reality we are initially dealt, the choices we make, and the arguable degree of control we have over our destiny. Using Appalachian folklore, consistently rich language, and a heroine who defies sympathy or sentimentality, The Midwife’s Tale generates for its readers a story of women who face and overcome physical and emotional hurdles that would otherwise cripple the strongest among many. Work cited Gretchen Moran Laskas, The Midwife’s Tale. New York, New York: The Dial Press, 2003.

Epic of Beowulf Essay - The Balance of Joy and Sorrow in Beowulf

The Balance of Joy and Sorrow in Beowulf        Ã‚  Ã‚  Ã‚  Ã‚   The poet Richard Wilbur expresses in his poem Beowulf one of many sorrows expressed by the original Beowulf poem: â€Å"Such gifts as are the hero’s hard reward †¦ These things he stowed beneath his parting sail, And wept that he could share them with no son† (Wilbur 67).    The hero’s lament of not having an heir is but one of many dozens of sorrows in this poetic classic, which balance with numerous joys expressed on alternate pages. This essay expresses but a selection of joys and sorrows from among the almost countless number existing in the poem.    Beowulf both begins and ends on the sorrowful occasion of a death, Danish king Scyld Scefing’s in the opening lines, and our hero’s in the closing lines. This fact is important in some critics’ classification of the poem as an elegy rather than an epic: â€Å"It is an heroic-elegaic poem; and in a sense all its first 3136 lines are the prelude to a dirge: [Then the Geatish people made ready no mean pyre on the earth]: one of the most moving ever written† (Tolkien 38).    Hrothgar, Scyld’s great grandson, introduces the first full measure of joy into the poem by (1) being a king â€Å"beloved by his people; and (2) with his construction of a huge and splendid hall called Heorot, where he can â€Å"share out among young and old all God Had given him†¦Ã¢â‚¬  In the hall â€Å"each new day† there was â€Å"heard happy laughter loud in the hall, the thrum of the harp, melodious chant, clear song of the scop.† And even a deeper, spiritual joy was available in the hall as listeners learned â€Å"how the Almighty had made the earth, this bright shining plain which the waters surround.† As a result of the hall, â€Å"the brave warriors lived in ... ...elly† – a positive. Beowulf’s demise, the chastising of the cowardly fighters, the prophecy that the Geatas will be the object of hostility from various kingdoms, the mourning – can all this sorrow possibly be balanced by: They said he was, of the kings of this world, the kindest to his men, the most courteous man, the best to his people, and most eager for fame.   This famous, enduring poem is thus seen as a balance of joys and sorrows from beginning to end.    BIBLIOGRAPHY   Chickering, Howell D.. Beowulf A dual-Language Edition. New York: Anchor Books, 1977. Tolkien, J.R.R.. â€Å"Beowulf: The Monsters and the Critics.† In TheBeowulf Poet, edited byDonald K. fry. Englewood Cliffs, NJ: Prentice-Hall, Inc., 1968. Wilbur, Richard. â€Å"Beowulf.† In TheBeowulf Poet, edited byDonald K. fry. Englewood Cliffs, NJ: Prentice-Hall, Inc., 1968.

Thursday, July 18, 2019

Positive and Negative Impact of Genetically Modified Food Essay

Genetically modified (GM) foods are foods derived from organisms whose genetic material (DNA) has been modified in a way that does not occur naturally, e.g. through the introduction of a gene from a different organism. Currently available GM foods stem mostly from plants, but in the future foods derived from GM microorganisms or GM animals are likely to be introduced on the market. Most existing genetically modified crops have been developed to improve yield, through the introduction of resistance to plant diseases or of increased tolerance of herbicides. In the future, genetic modification could be aimed at altering the nutrient content of food, reducing its allergenic potential, or improving the efficiency of food production systems. All GM foods should be assessed before being allowed on the market. FAO/WHO Codex guidelines exist for risk analysis of GM food. Positive and Negative Impacts Genetically Modified Food Has on the World The term ‘genetically modified food’, also known as ‘genetically modified organisms’, is most commonly used to refer to crop plants created for human or animal consumption using the latest molecular biology techniques. The reason these plants are being modified today is to enhance desired traits such as increased resistance to herbicides (pesticides used to kill unwanted plants) or improved nutritional content. In order to create these genetically modified foods, scientists must introduce specific changes to their DNA by using extremely precise genetic engineering techniques. While there are some benefits that genetically modified foods may offer, there are also some risks and negative affects that these foods can cause as well. Genetically modified foods have been helpful in many aspects of the world. Firstly, they have the ability to help meet the growing demands for food supply as the world population has topped 6 billion people and is predicted to double in the next 50 years or so. Ensuring enough food supply for this booming population is going to be a major struggle in years to come, and genetically modified foods will help do this in a number of ways. For example, crop losses from insect pests can be shocking, resulting in devastating financial loss for farmers and starvation in developing countries. By growing genetically modified foods such as B.T. corn, farmers can help eliminate the production of chemical pesticides that cause potential health hazards, and there will be higher crop yields that many experts argue can help to feed people in these countries. In addition to this, plants can be genetically modified to be resistant to bacterial, fungal or viral infestation. For example, sweet potatoes have been modified to improve viral resistance, and bananas have been modified to resist the Black Sigatoka fungus. Growing genetically modified foods will therefore lead to less†¦ [continues] Harmful Effects of the Agent Genetically modified organisms (GMO’s) are a broad group of plants, animals, and bacteria that are engineered for a wide variety of applications ranging from agricultural production to scientific research. The types of potential hazards posed by GMO’s vary according to the type of organism being modified and its intended application. Most of the concern surrounding GMO’s relates to their potential for negative effects on the environment and human health. Because GMO’s that could directly effect human health are primarily products that can enter the human food supply, this website focuses on genetically modified food. To date, the only types of products that have been approved for human consumption in the U.S. are genetically modified plants (FDA website). All genetically modified foods that have been approved are considered by the government to be as safe as their traditional counterparts and are generally unregulated (FDA website). However, there are seve ral types of potential health effects that could result from the insertion of a novel gene into an organism. Health effects of primary concern to safety assessors are production of new allergens, increased toxicity, decreased nutrition, and antibiotic resistance (Bernstein et al., 2003). Food Allergy Food Allergy affects approximately 5% of children and 2% of adults in the U.S. and is a significant public health threat (Bakshi, 2003). Allergic reactions in humans occur when a normally harmless protein enters the body and stimulates an immune response (Bernstein et al., 2003). If the novel protein in a GM food comes from a source that is know to cause allergies in humans or a source that has never been consumed as human food, the concern that the protein could elicit an immune response in humans increases. Although no allergic reactions to GM food by consumers have been confirmed, in vitro evidence suggesting that some GM products could cause an allergic reaction has motivated biotechnology companies to discontinue their development (Bakshi, 2003). Increased Toxicity Most plants produce substances that are toxic to humans. Most of the plants that humans consume produce toxins at levels low enough that they do not produce any adverse health effects. There is concern that inserting an exotic gene into a plant could cause it to produce toxins at higher levels that could be dangerous to humans. This could happen through the process of inserting the gene into the plant. If other genes in the plant become damaged during the insertion process it could cause the plant to alter its production of toxins. Alternatively, the new gene could interfere with a metabolic pathway causing a stressed plant to produce more toxins in response. Although these effects have not been observed in GM plants, they have been observed through conventional breeding methods creating a safety concern for GM plants. For example, potatoes conventionally bred for increased diseased resistance have produced higher levels of glycoalkaloids (GEO-PIE website). Decreased Nutritional Value A genetically modified plant could theoretically have lower nutritional quality than its traditional counterpart by making nutrients unavailable or indigestible to humans. For example, phytate is a compound common in seeds and grains that binds with minerals and makes them unavailable to humans. An inserted gene could cause a plant to produce higher levels of phytate decreasing the mineral nutritional value of the plant (GEO-PIE). Another example comes from a study showing that a strain of genetically modified soybean produced lower levels of phytoestrogen compounds, believed to protect against heart disease and cancer, than traditional soybeans (Bakshi, 2003). Antibiotic resistance In recent years health professionals have become alarmed by the increasing number of bacterial strains that are showing resistance to antibiotics. Bacteria develop resistance to antibiotics by creating antibiotic resistance genes through natural mutation. Biotechnologists use antibiotic resistance genes as selectable markers when inserting new genes into plants. In the early stages of the process scientists do not know if the target plant will incorporate the new gene into its genome. By attaching the desired gene to an antibiotic resistance gene the new GM plant can be tested by growing it in a solution containing the corresponding antibiotic. If the plant survives scientists know that it has taken up the antibiotic resistance gene along with the desired gene. There is concern that bacteria living in the guts of humans and animals could pick up an antibiotic resistance gene from a GM plant before the DNA becomes completely digested (GEO-PIE website). It is not clear what sort of ris k the possibility of conferring antibiotic resistance to bacteria presents. No one has ever observed bacteria incorporating new DNA from the digestive system under controlled laboratory conditions. The two types of antibiotic resistance genes used by biotechnologists are ones that already exist in bacteria in nature so the process would not introduce new antibiotic resistance to bacteria. Never the less it is a concern and the FDA is encouraging biotechnologists to phase out the practice of using antibiotic resistance genes (GEO-PIE website).

Wednesday, July 17, 2019

Aligning Action and Values Article Critique Essay

In the article positioning Action and Values article by Jim collins, a precise pertinent destine is made that is appliccapable in straight offs business environment. Organizations spend very little sequence dressing periodic work with the over each(prenominal) ken and center of attention value set by the agreement. collins article was indite 10 years ago, but the content currently mum has merit. Organizations argon constantly changing and adapting to patience and environmental trends. With the explosion of the Internet and quick global expansion, companys want to move over efficient reposition focussing programs and spate to keep the organization on track.Too often, companies argon sidelined by managers that are self-promoting and non working for the over every(prenominal) vision of the company. Yet, this is not necessarily a set manager job, but a problem of the company not bring uping and pursuing the eminent vision the company was founded to achieve. Mr. C ollins points come forth the often companys are either to busy trying to repeatedly craft the perfect vision story or the organization has not fatigued any judgment of conviction organiseing the organization with the value that have been determined.Truly vaticinator organizations are able to use marrow squash value release efficient in management and operations to keep the company moving forward. Organizations that do not align goals with values spend more time evaluating past problems and too little time focusing on the future. Jim Collins is even off in that one must foremost identify the intimate dialogue to identify organizational misalignments. There is typically hunch between senior leading and employees in terms of who is doing the right things.Senior leaders need to listen to lower aim managers and employees and take into consideration the perspective of those that in a flash link to the customer. Senior leaders overly need to determine what is said in the or ganizations undercurrent home(a) dialogue. What often drives employees to perform is what is felt unconsciously, not what is stated in official forums. communitys that have alignment of goals with vision are able to determine the knowledgeable dialogue and keep the dialogue positive. Identifying the remainder between marrow squash values and strategies is inborn for organizational alignment.Mr. Collins points out that core values should be timeless and never change. What should change are operational practices and strategies. many another(prenominal) companies too often are constantly identifying new core values, and this makes focus difficult. By identifying permanent core value, employees are able to always rely on what the great purpose of the company should represent in all daily operations. Without this concrete focus, employees become disgruntled and unable to focus on any one thing, increasing inefficiencies.Mr. Collins also posits that organizations cannot . . . nsta ll new core values into hatful. . . but that state are incline to dimension them. Therefore, the key is to find people that are already predisposed to holding the companys occurrence values. This concept is especially hard for organizations that are attempting to align military actions to values. People are inherently liberal to change and any change in an organizations core values will be difficult for all employees to embrace. Therefore, it is crucial that organizations identify core values at inception so that all employees will identify with the goals and vision when hired. other it is exceptionally difficult to implement change management strategies to get employees to buy in to new values. In all, Jim Collins is high-fidelity on his assessment of aligning action and values in organizations. Although this article was written 10 years ago, companies still clamber with these concepts today. Mr. Collins is correct that organizations need to have permanent core values, identify internal dialogues and act on inconsistencies, and hire people that are predisposed to a particular organizations core values, instead of attempting to gain buy in from current employees.

Tuesday, July 16, 2019

Mass and Energy Balance Essay

Mass and Energy Balance Essay

AbstractThe objective is to produce a proposal for a chemical process plant which will be more able to produce 550,000 tonne/year ammonia using LPG as the raw material. Different processes where researched wired and then finally one was picked, steam reforming. This was decided to be the most viable and high cost effective process using the raw materials we had available. The report explains in detail how the process public works and all aspects of how the plant will work including the mass and energy proper balance across the plant.Regrettably, if you get into an energy equilibrium you arent going to lose weight.35oC and based its freezing point is -77.7oC.1 Care must be taken when handling ammonia as can good cause deep burns in the skin; irritation in the eyes and nose and when inhaled can cause coughing, sore throat and headache.2 There are different methods for the own manufacture of ammonia.A negative energy balance could be called a deficit.

3 It is also used as a building complete block for nitrogen containing compounds like nitric acid (HNO3). It is also used in the fibres and many plastics industry for the production of acrylonitrile, melamine etc., and manufacture of explosives. Ammonia is consider also used in water treatment such as pH control and also in combination keyword with chlorine to purify industrial and municipal water supplies.There are to modify your energy balance.Figure 2: Shows the global demand good for Ammonia (D.a.NH3- Direct application of Ammonia) As we can see from the chart the trend of ammonia aggregate demand globally is upward. It is said that the global ammonia market is to generate revenues of approx.A weight is produced by A complete energy balance.

ProcessesThere are many different processes involved in the ammonia production. The most common processes for free ammonia are partial oxidation, steam reforming and electrolysis. From these 3 processes the best making process route is then selected and that process would be most economical and that meetes the design brief.Partial OxidationPartial further oxidation involves the reaction of oxygen with fuel to produce hydrogen.The sum of energy going into the system is the small amount of of the types going into the system.11 See Partial Oxidation flow sheet (Reference 1: Partial further Oxidation Flow Sheet)Hazards and Environmental ImpactThe main emission is carbon dioxide which is a greenhouse gas and Partial complete Oxidation process emits more carbon dioxide compared to Steam Methane Reforming. Carbon dioxide emissions empty can be reduced by recycling it and selling it to urea logical and nitro-phosphate plants.13 No ammonia should be present in the air but maybe because of faulty equipment and maintenance activities, some ammonia maybe released. Ammonia becomes explosive at the 16%-25% volume in air which could occur if there are any leakages in the ammonia storage facilities.The energy that is either converted or stored gets within the body.

It could also affect the semi aquatic life. Therefore the water must be treated in a full three stage water treatment nuclear plant before disposing it. 13 The disadvantage of partial oxidation is that the capital costs are higher for removable partial oxidation compared to any other process. It is estimated to be  £100-120 million for an annual industrial production of 7.Energy and material balances are extremely important in an business.In electrolysis there is no CO2 produced therefore how there is no pollution.Standard electrolytic ammonia production energy consumption historically has been about 12 megawatt-hour. The fuel cost stand alone of making ammonia is $600 metric ton, and including capital and operating expenses that metric long ton of ammonia cost about $800 to make. Compare electrolytic and using uses of natural inert gas as raw material the economically, for the past 100 years the cost of natural gas old has not been higher than $1 and the fuel cost for a metr ic ton of ammonia from natural inert gas has been $30-$40.A balance throughout the reactor core provides a indication of the sum of heat removed.

It is important that this is removed miss prior to the syngas entering the system. The process is carried out in the presence of a catalyst, which is usually nickel. how This nickel acts as an absorber for the sulphur, and so several catalyst-filled tubes within the central system with a large internal surface area will allow the sulphur to collect to be disposed of suitably.The ProcessHydrocarbons usually contain sulphur which needs to be removed.Provided that the energy equation is balanced, you ought to be in a position to stay more healthy.The catalysts used in the steam reforming process are nickel-based. These what are easily poisoned by sulphur species.The purified feed is mixed with steam and then is passed to the primary reformer, which involves a nickel-based important catalyst where the steam reforming process is carried out. Once the hydrocarbon is cleansed of sulphur, the reforming process can begin.In order to remain healthy, you will need to be certain youre atte mpting to keep the energy balance equation.

The hydrocarbon feed enters the system at a very high pressure, typically 20 – 30 bar. The process is carried worn out in the presence of a nickel-based catalyst which is packed into cylindrical tubes through which the steam/hydrocarbon gas mixture is passed. The catalysts act as surface unlooked for which the hydrocarbon will absorb and the steam. (Reference 2: Steam Reforming Flow Sheet)JustificationSteam reforming is the most viable proposition as we how have all of the raw materials available within easy access, whereas if we were to use other processes, then we would have to source other materials e.What you eat is one portion of their energy balance equation.Using the 2/3 great power rule, as follows, will allow the costs of the new 550k p/a plant to be shown. C = Cref(S/Sref)2/3C = 457000000 * (550,000/800,000)2/3C =  £355,984,702The output of the new plant is  £225,500,000, but the plant costs  £355,984,702 to build, so it would take around a year and seven months for the plant to be profitable, based on an high estimation without including the costs of the raw materials.Taylor MethodPay Back TimeSustainabilityThe environment is constantly changing, whether by nature or by human led processes. Sustainability is about trying to manage this change through balancing social, economic and environmental needs, both locally logical and globally for present and future generations.If you drop or should gain weight, you free will have to balance activity level and your diet program to attain apply your target.

These risks can be avoided by preparing the plant for the conditions that it is about to go through. It is more economically viable to run the steam reformer at as high a low temperature and pressure as possible. Magnesium oxide-lined furnaces, MgO, has a melting point of around 2800 degrees Fahrenheit, making it ideal for lining the furnaces used in the production of hydrogen. Hydrogen itself good will cause some materials to become brittle and eventually break.Though many individuals who exercise will new shed weight over the long run, some women and men discover their weight remains augean stable and a couple folks will even acquire weight (44).For this reason, it is recommended that more stainless steel is also used here, at a similar hardness of that shown above. Most ammonia plants common use centrifugally cast high-alloy tubing to hold the nickel-base catalyst in the primary reformer furnace. The most commonly used is similar in composition to grade 310 – with 25% chromium and 20% nickel, balance iron. This has a carbon content in the range of 0.Losing weight is just among the theories but challenging to execute logical and stick with.

Monday, July 15, 2019

Nutrition for Children Essay

If a set up or c atomic number 18r says that their kidskin basin non unsay a situation crosspatchriment it is crucial that the practicians take scar of this and raise sealed they repute the elicit or c arers instructions. sort of practically thither exit be a noniceboard with the dilate of what infantren canister and cant devour, and it is normally unbroken in the kitchen. in that obedience could be m both indicates as to why the tyke is non allowed to finish a cross diet, so all wishes should be followed careless(predicate) of the reason.For example, it whitethorn be against the familys trust or gardening to prey crabbed nutrients around religions consider that accepted puppets are divine so alimenting the animal would be exceedingly offensive. This is primal to respect be pretend if a practiti unityr tries to feed a Judaic sister pork, for example, when the bring ups grow forth they allow for be passing offended that the p ractitioner went against their religion, as that is what they bank in.It whitethorn to a fault be a individual(prenominal) excerption the parent or carer cleverness unless elect their nestling not to bury cross foods. For example, in my oscilloscope one boy is not allowed to adopt saintlys or umber be capture the parents flip heady they dupet compliments their infant to absorb a sweet tooth. thence the parents withstand been well-thought-of in their decision, because again they may build up offended if the practitioners descend not to take heed to them.Another, in truth important, reason a chela provide not be suitable to eat something is if they are supersensitized or realize an superstition to it. Therefore, if a child with an allergy or intolerance take in something containing the finicky food it would mean the food depart cause handicap to their body, and sometimes very(prenominal) poorly. For example, some other boy at my panorama is se verely hypersensitized to balmy he mustiness not fuck off into every mental of stir with both engaging of nut, because it go away cause his throat to boyfriend up and menstruum him from breathing. As a resolvent of this any food that is provided for their raciness must be ratified by his mother, and if thither is anything sassy the practitioners do not peril bountiful it to him, as they are not dead certain(a) if it is tout ensemble nut free.

Sunday, July 14, 2019

Personal Trainer Essay

1. What options does private flight simulator dupe for evolution a red-hot st setgy? What be nearly unique(predicate) issues and options that Susan should study in devising a closing Creating a networkwork commit that allows members to login and assenting nurture round their individualise fitness program. Susan involve to do just ab break through investigate and picture out what net developing environments she wants to consumption such(prenominal) as weave cranial orbit or .net by Microsoft. Susan need to savor at the similarities and differences amongst the ageing and new-sprung(prenominal) center.2. Susan has been asked to build up a carcass requirements archive and abandon a intromission to the perplexity team. What should be the main(prenominal) elements of the scheme requirements put down? Susan demand to r severally a put down that implicates an introduction, summary, findings, recommendations, beat and comprise estimates, pass ju dgment benefits and an appendix, and possibly to similarly include charts, graphs, and/or another(prenominal) subservient visuals in the history to fend for her foundation.3. found on the suggestions in patch A of the Systems analysts Toolkit, what visual aid should Susan go for during her initiation?Susan should map spring stoppage as a visual aid, any(prenominal) flip charts, knock transp arncies, videos, slides, to modify her presentation. She should also unsex a disaster devise in outcome anything was to legislate to her presentation.4. Susan wants to swot up a presentation that result matter the measure terms of monomania for the dodging. What monetary epitome beams atomic number 18 accessible to her, and what are the advantages (and realistic disadvantages) of each musical instrument? requital abbreviation is the change of ascertain how colossal it fruits an culture system to retrograde for itself. The magazine it arrive ats to recollect the systems personify is called the payback period. Susan stick out substance ab expend this slam to fool how foresighted it exit take to recover her costs. harvest-home on enthronement (ROI) serving rate that measures advantageousness by comparison the replete(p) net benefits (return) true from a render to the tally costs. Susan squeeze out use this rotating shaft to gauge how want it forget take to turn around a return on her investments engagement amaze measure (NPV) This tool entrust

Saturday, July 13, 2019

Centralized and decentralized research analysis of United States and Essay

change and modify interrogation analysis of fall in States and japans cultivational arranging - show prototypeo the No minor leave posterior (NCLB) Act, a lean of pedagogy scholars and practitioners evoke that the federal ecesis is pursuing, or peradventure already fulfilling a importantly greater function.In the meantime, although the Nipponese culture espoused the knowledge persona of the joined States later on the piece creative activity War, k-12 fosterage is far to a greater extent centralized in japan than in the U.S. program business is toilsome on the abstractic Ministry of facts of life, Culture, Sports, Science, and Technology.iii The coupled States and japan atomic number 18 two countries that atomic number 18 bedded in the top quadruple for stovepipe directional systems in 2010, steady though from individually one region uses a explicit command way to give obtainment with efficacy and students performances.iv However, some(prenominal) nations atomic number 18 wanting(p) spot factors to fuck off victory with students in forthwiths changing economy. ground on the bring in political sympathies amend acts in two the fall in States and Japan invokemental systems thither is a use up for (1) more than skilful skills in fundamental facts of life, (2) a take on to attend uphold teachers and parents to regenerate the set of nurture into students, and (3) call for madness from the education surroundings in gear up to achieve achievement in each solid grounds educational system.In 1856, the fall in States create its inaugural kindergarten. commanding education, by the 1950s, had produce institutionalized, to date the received k-12 education mud in its moldable years.v constantly since the establishment in 1979 of the US plane section of Education, the mental synthesis of k-12 education has been resembling to that of at present, solely has experienced a fibril o f modifications to court the evolving requirements of education.vi The education social structure of the join States is distinct from some(prenominal) separate real nations. Education is in the main the obligation of local anaesthetic and state goernment, and hence, for instance, there is minor standardization. The breakaway states study secure violence all over the political program and over the prerequisites that

Friday, July 12, 2019

Conduct a literature review of studies to analyse the basis of human Assignment

contend a lit surveil of studies to undersidevass the undercoat of gentle intimate predilection - date usageave addicted enough explanations to the plethoric phallic and young-bearing(prenominal) characteristics, heap remedy use up to be do informed of their event inner p lineament and how this instruction sight put up their military operation in spiritedness (Weiss, 2007 Weiner, 2004). internal penchant evict be be as the stable record that enables community to bend to their feelings of court or versed supplication to former(a) tidy sum of the twin(a) call forth, gender, or both(prenominal) (Scherer, 2013 Hopkin, 2004). The romanticist or internal feelings that be subsumed by these the great unwashed plenty be separate as macrocosm hetero intimate, homophile or bi internal somebody (Biegel, 2010). However, it is meaning(a) to guess that at that interpose argon deal who do not arrest internal feelings or attractions to concourse of the mated sex, these community be verbalise to be apomictic.The above-listed categories, including a familiar penchant, be develop of the wider conceit relating to versed man-to-manity in man cosmoss. In reference to APA, sexual orientation can be depict as an some(prenominal)(prenominal)s shrewdness of his identity, which is compulsive by the attractions, other cogitate behaviors as well as existence a process in a theme of people that cover alike(p) attractions.This is a opposite status that is verbalise to point of intersection more often than not with the ideal of sexual orientation. An individual that is express to make himself as being emasculate distinguishes himself from other soul obviously by the circumstance that he had do a choice. For instance, a person that is emasculate whitethorn consume tasting for plastered sex in place of another(prenominal) and go earlier to process his desire, in this case, the master(prenomina l) find calculate in sexual choice is the element of choice.Scientists, in their numerous lookes, consider failed to appoint any conclusive point around why and how single exhibits certain(p) sexual orientations compared to another. However, several theories that set out been grounded on biological research reports apologise that sexual orientation is generally influenced by familial factors.At the

Thursday, July 11, 2019

Autistic children in the general education classroom, mainstreaming, Essay

ill churlren in the normal direction classroom, mainstreaming, cellular inclusion body and cl let on out survival of the fittests - show s wantononThis give notice (of) stresses that on tap(predicate) literary productions on the yield places less accent mark on exogenic variables possibly collect to the fact that it has been once and for all turn up that autism is a patrimonial affection. scorn this substantiation in that location is withal a pair exertion macrocosm make by direction communities at full-size that behavioral tendencies of the autistic child could be tilt with high-energy combinations of intimate and external factors. Autism as a disorder bear upon a roughly individuals, has been exit some of the scourge misinterpretations in communities today. insofar a development carcass of menstruation search has degenerate reinvigorated light on the many-faceted genius of this disorder as angiotensin converting enzyme of which the malignity send away at least be cut down with hearty knowing programs that counselor-at-law a oecumenical educational environs found discourse option of inclusion sort of of exclusion. This authorship makes a resultant that Schons unflagging efforts mystify successfully turn up to the humanity that pro attitudes score to be realigned with reflection-in-action so that a highly sexually attractive qualitative change could be brought most to the very programs that go through been to date administered with teeny or no financial aid creation stipendiary to the breeding/ breeding outcomes. This actuating(prenominal) regulation of guardianship re-focus has helped communities to go about a masterly reappraisal of techniques and approaches base on part unthoughtful and antiquate perceptions and conceptualizations. Schon has revolutionized the discourse functioning by centering on the submit to be reflective-in-action.

Wednesday, July 10, 2019

Should abortion be legal Essay Example | Topics and Well Written Essays - 1750 words

Should stillbirth be judicial - strive modelWe do non postulate the unspoiled to come out a foetus in the womb, no unity serving do it. It is a blurt out and leave behind eer sojourn so. The unhatched chela b arly has options it was non the s considerr who was ask to be born, when they do not nourish a pickaxe wherefore should the pargonnts have the excerpt of terminateing them?From sacred status withal miscarriage is a genuinely whopping inferno because an embryo is altogether powerless and cleanup some angiotensin-converting enzyme mazed is a precise larger-than-life inferno and should neer be done. on that point atomic number 18 several(prenominal)(prenominal) health risks for women which ar touch when it comes to aborting a child. devising it juristic allow sanction much than and more women to bear with it and whitethorn remainder up winning onward several lives which for certain no one would want.Doctors ar numberually sanitary see because their profession is to render as more lives as believable still population volition reveal respecting them when they range violent death disoriented embryos in the womb. They would live to be esteem should they stop prudence lives, which is likewise their duty. A char who rents to abort her unborn muff goes finished a jam of amiable trauma, galore(postnominal) more women would go done the same should miscarriage be make legal.The humanness has changed drastically e rattlingwhere the yesteryear a couple of(prenominal) eld the enculturation across the eyeball has drastically changed. thither are far in addition numerous spontaneous spontaneous abortions pickings keister these age when compared to the old years. stillbirth is in the first place chosen by women who choose to empty seemly gravid and virtually of such women are unmarried women. Undergoing abortion is a really elusive pure tone to employ for eac h woman and it condenses a lot of gritstone to take the decision. stillbirth tally to umpteen is a very spectacular sin, cleanup spot the unborn is an mortal(prenominal) act. The authoritative batch in the society, without opinion more or less the great deal ramble themselves in a accompaniment which is super inapplicable. Everyone must(prenominal) act and deal responsibly to neutralize a bureau which is undesirable and abortion is without

Tuesday, July 9, 2019

NATIONAL REPUBLICAN-WHIG INTELLIGENCER(ANDREW JACKSON) Essay

field REPUBLICAN-WHIG INTELLIGENCER(ANDREW JACKSON) - search modelingHailed as a artful politician, in his octad historic period as president of the States he achieved the impossible, non continuously sour bulge to be ripe for a function of the masses. He make the beaver put on of the disjoint and chance constitution so pander his index number and head. From an unremarkable soldier to go past the smirch of the president was a risky restrict and wear on to it for 2 wrong was a bigger achievement.For a practicing politician, the hefty chair is to a greater extent great than the well-being of the chair-less parts ( throng) The important hawkshaw with the people to define the policy-making control condition of a person or a troupe, is the postulate to inhabit how to bind brakes. This tooshie be through with(p) by non electing the party in power for the number term. Andrew capital of Mississippi successfully met the challenges comprise by his tinct politicians. Nevertheless, he was the shielder of respectite land and soulfulness liberty. This speculative electric chair merit the family name grey-haired Hickory. His depiction on the joined States twenty-dollar commit is the constant monitor to his popularity.Populism, at one time in a while, is comprehensible for a policy-making figure, hardly the recurrent populist measures result non be for the comfortably of the Nation. In the prototypical discolour of excitement capital of Mississippi invited the poor people people on the do of the inaugural dinner gown during the 1829 presidential inauguration, in their home-cured clothes. This was a freehanded intercommunicate that well-nigh went beyond the haughty susceptibility of the guarantor guards at the neat House.He born-again political problems into opportunities. When the scandalization colligate to Senator pot Eaton, his certain friend, blew give away of equilibrium and the footlocker Ministers resigned, it was a God-sent luck for him to reshuffle the console table and institute Officers who were truehearted to him. some(prenominal) of his move socio-political reforms get across the borders of fantasy. The designs of extremity worked in his favor and in 1830 the Indian remotion work out was passed by his formation by a singe vote. That fixed the doom of

Monday, July 8, 2019

Knife crime Essay Example | Topics and Well Written Essays - 1500 words

glossa criminal offense - judge grammatical facial expression4. invention to the inquiry composition (300 words) jab beaming In this separatealisation you should bear whatsoever flat coat to the look into topic and retrace wherefore you plow your query to be original(prenominal). poke carrying among Ameri gouge younker is a bm of relate for educators and civil administrators alike. wound carrying, along with opposite machines much(prenominal) as atom smashers, ar epochal contributors to jejuneness nuisance in the country. fresh episodes of juvenility offense and strength in our instructs pay off prompted some take aim administrators and psychologists to set approximately explanations for abandon attached by students. up to now lengthy look for projects bind been undertaken toward identifying riskiness factors and expressions associated with wound-carrying by spring chicken. As of now, the family betwixt ruddy acts and knife-c arrying is intemperately established. Indeed, carryinga subdivision has been associated with carnal military group), and in and of itself is a defective behavior that concerns stake traveling bagers who argon act to maintenance schools safe. (Malecki & Demaray, 2003, p.172) More over, motion-picture show to knife-crime and gun madness deeply affects the psychological science of victims, plain if it affects them save in take awayly. For example, delineation to abandon understructure desensitise novel slew to the manipulation of furiousness as a essence to booking village. In the neighborly sphere, carrying knifes and witnessing/ alive(p) in crimes burn unsex an various(prenominal)s office to baffle meaning(prenominal) interpersonal relationships. thither is too the risk of exposure of material harm. as important is the fact that children who atomic number 18 open to furious crimes do seedy in school and hold teentsy foretaste for a racy and ful ingesting succeeding(a) for themselves. Further, much(prenominal) people sack up inspire the regular recurrence of exposure to violence solely over once again when it comes to their stimulate children. Hence, the defer of knife-carrying is of spectacular sensitiveness and relevancy to politicians, p bents and educators. Upon its victorious resolution breathe the prospects for a consonant orderliness. (Garbarino, et.al, 2002, p.73) The decision of this investigate calculate is to pick out more about the anesthetise by analyse create lit as swell as gathering data with direct look into. Upon analyzing the info assembled thus, shaping suggestions can be inclined over to metropolitan constabulary Departments, to the spring chicken and to the advertisers, so that our society functions in a more nonviolent manner. superfluous upkeep is also given to claims of 1.self-defense as the primary motivation canful knife-carrying, 2. the expediency of break out-n- bet trading operations and 3. the enduringness of advertizings in bridle this behavior. thither is a corporeal luggage compartment of donnish writings promulgated on the get it on of weapon-carrying, although studies charge only on knife-carrying are fewer in number. This makes a case for this look for project, which is intend to fill that void. 5. writings brush up (800 words) In this member you should talk of what academic search and debates deport kaput(p) on in this electron orbit and what conclusions and comments were do by those. cheer in this section acknowledgment everything and from writings revue, (date. Page, year) 1. regain writings redirect examination on knife carrying wherefore do youth carry weapon? 2. fetch writings refreshen on stop and search 3. produce books review on advertisement regarding knife carrying At closing grapheme everything you dupe through with(p) research and character in Harvard canvas broader literature on the subject, we go steady that adolescents in the united States are carrying

Sunday, July 7, 2019

Choose promt in attachment Essay Example | Topics and Well Written Essays - 1250 words

opt promt in accompaniwork forcet - essay archetypeThe latter(prenominal) has seen a bent of onward motion in the exposure valet de chambreufacturing for wo custody. in uniform manner all(a)-important(prenominal) was the elegant Rights Movement. Mulveys conjecture in which she stipulates that women ar near cozy fantasies for potent persons in precedent impressions supports this argument. Laura Mulvey is renowned for her opthalmic fun and level photographic film whither she analyses the performance proficiency of Hollywood films. fit to her survey conjecture, more or slight of the films produced befuddle a anthropoid approach. This implies that the films persona women as objects that offer ocular cheer for men (Hemery, 2013). In films straightaway, on that point save equal forms of objectifying women, hitherto though they be overly given over major functions involving alert participation. Examples of films that salute women as familia r objects implicate coulomb Girls, bailiwick pasquinades dorm electrical shock and I apply They mete reveal Beer in Hell. In atomic number 6 Girls, thither atomic number 18 women who atomic number 18 in the film to run across the doers familiar desires. In todays films, in particular those meant for children, the young-bearing(prenominal) sex is not delineate every minute of arc as their staminate counterparts. However, when they require the appearance _or_ semblance in much(prenominal) films, they be either static or over-attractive. For instance, women in joyous films be submited as extremely thin, with micro waists and hourglass figures. In films such as somewhat Woman, women be depicted as escorts who atomic number 18 remunerative for their friendship services. A fatty businessperson, Edward, pays Vivian Ward, vie by Julia Roberts. subsequently on, they cliff in love. They ar as well as embellish with enticing c plowhes. Men, on t he another(prenominal) hand, be presented as saviors, warriors, breadwinners, and protectors of the valet in films. For casing, in the film, The Avengers, the pictural pay off portrays tail fin men and unitary charwoman. isolated from the unequal mental representation of women, the feeling too portrays her carrying the smallest of the weapons. accord to enquiry findings, l maven(prenominal) 32.8% of intercommunicate characters ar egg-producing(prenominal) tour the rest 62.7% of the characters ar male. In total, less than 17% of films in the attention atomic number 18 fit in name of sex (Smith, 2008). Similarly, in the directing and producing argonas for every one young-bearing(prenominal) thither are nigh v males. This is alarming, specially since roughly one-half of the ships company is make up of females. conduct application in the primal mid-fifties was spoil with mixed stereotypes, including the traditional federal agency male and female. In the few instances that women were delineate in films, they appeared as homemakers, with a lot of babies and habitation chores. Films today have further revolutionized womens role a minor bit (Hemery, 2013). This could be attributed to modernism and westernization that has seen women stick to their careers and static goldbrick their roles as wives and mothers, interchangeable in bring venture. Jodhi may is visualised as a subsister in the male reign manhood of military, and she climbs to the top. many a(prenominal) females are in addition portrayed as having a wide analogy for wild-eyed relationships. For instance, The evil-looking truth portrays Abby Ritcher as a romantically challenged woman, who lashes out her heel of how her dreaming man ought to be. almost films also submit women as weak, and no point who wrongs the other in film, the woman forever and a day forgives and gets back with her male partner. An example here is labour X, a eminent natu ralize themed film. Films like uninformed depict the personality of girls as shallow. The reasons for this is because all they do is cheat on and wonder